Bluetooth – mintCast https://mintcast.org The podcast by the Linux Mint community for all users of Linux Wed, 23 Jun 2021 15:16:54 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://mintcast.org/wp-content/uploads/2020/03/cropped-small-logo-32x32.png Bluetooth – mintCast https://mintcast.org 32 32 mintCast false episodic CC-BY-SA 4.0 CC-BY-SA 4.0 podcast Bluetooth – mintCast https://mintcast.org/wp-content/uploads/2020/03/big-logo-1600.png https://mintcast.org TV-G 164426984 mintCast 363.5 – Incremental Improvements https://mintcast.org/mintcast-363-5-incremental-improvements/ Wed, 23 Jun 2021 15:03:11 +0000 https://mintcast.org/?p=5109 And finally, the feedback and a couple suggestions
Download
]]> 1:32 Linux Innards
31:35 Vibrations from the Ether
59:24 Check this Out
1:05:55 Announcements & Outro

In our Innards section, we updated the livestream setup, so we’ll chat about that and the accessories to go along with

And finally, the feedback and a couple suggestions

Twitter. Discord. Telegram. Matrix. Reddit.

Linux Innards

Vibrations from the Ether

  • Larry Murphy
  • Stan Reichardt
  • JD

Check This Out

Announcements: 

Wrap-up:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Owen Peery for our audio editing, Josh Lowe for all his work on the website, Hobstar for our logo, initrd for the animated Discord logo, and Londoner for our time sync
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • HPR for our backup Mumble room
  • The Linux Mint development team for the fine distro we love to talk about <Thanks, Clem!>
]]> full 5109 mintCast 359 – COSMIC Proportions (mp3) https://mintcast.org/mintcast-359-cosmic-proportions-mp3/ Wed, 21 Apr 2021 06:36:29 +0000 https://mintcast.org/?p=5029 Then, in the News, we get hypnotized, we look at Apple M1 support again, celebrate a birthday, and look to the stars.
In Security, Skynet.
Download
]]> Download

1:59 Bi-Weekly Wanderings
39:55 The News
1:18:36 Security Update
1:26:05 Announcements & Outro

First up, in our Wanderings, I get a fresh stream, Joe sends his keystrokes over the air, Josh has a server dilemma, and Mike heads to space.

Then, in the News, we get hypnotized, we look at Apple M1 support again, celebrate a birthday, and look to the stars.

In Security, Skynet.

BI-WEEKLY WANDERINGS: 

THE NEWS:

SECURITY UPDATE: 

ANNOUNCEMENTS: 

Wrap-up:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Owen Peery for our audio editing, Josh Lowe for all his work on the website, Hobstar for our logo, initrd for the animated logo, and Londoner for our time sync
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • HPR for our backup Mumble room
  • The Linux Mint development team for the fine distro we love to talk about <Thanks, Clem!>
]]> full 5029 mintCast 359 – COSMIC Proportions https://mintcast.org/mintcast-359-cosmic-proportions/ Wed, 21 Apr 2021 06:25:28 +0000 https://mintcast.org/?p=5024 Then, in the News, we get hypnotized, we look at Apple M1 support again, celebrate a birthday, and look to the stars.
In Security, Skynet.
Download
]]> Download

1:59 Bi-Weekly Wanderings
39:55 The News
1:18:36 Security Update
1:26:05 Announcements & Outro

First up, in our Wanderings, I get a fresh stream, Joe sends his keystrokes over the air, Josh has a server dilemma, and Mike heads to space.

Then, in the News, we get hypnotized, we look at Apple M1 support again, celebrate a birthday, and look to the stars.

In Security, Skynet.

BI-WEEKLY WANDERINGS: 

THE NEWS:

SECURITY UPDATE: 

ANNOUNCEMENTS: 

Wrap-up:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Owen Peery for our audio editing, Josh Lowe for all his work on the website, Hobstar for our logo, initrd for the animated logo, and Londoner for our time sync
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • HPR for our backup Mumble room
  • The Linux Mint development team for the fine distro we love to talk about <Thanks, Clem!>
]]> full 5024 mintCast 329 – fish Pi and Wine https://mintcast.org/mintcast-329-fish-pi-and-wine/ Wed, 26 Feb 2020 06:30:41 +0000 http://mintcast.org/?p=4241 Then in our news, Python 2 is dying, a new kernel is in the works, ElementaryOS is getting devs paid, and more.
In security, we talk more Firefox woes.
Download
]]>

Download

First up, in our Wanderings, I go fishing, Bo has some Wine, and Joe bakes some Pi.

Then in our news, Python 2 is dying, a new kernel is in the works, ElementaryOS is getting devs paid, and more.

In security, we talk more Firefox woes.

Bi-Weekly Wanderings:

  • Leo
    • Been hearing about “FISH” shell for a while, and never figured I’d need anything more than BASH. Well, that’s still true, but FISH is pretty awesome.
    • We missed the news of Fish’s 3.1.0 release back on the 12th.
    • Great for beginners, but can be a double edged sword.
  • Bo
    • Recorded first session of Star Trek Adventures. Check it out at ecnradio.com
    • I could let Leo have the highest kernel version of the show so I installed kernel 5.5 and borked my Mint installation.
    • Running into Wine installation issues on Mint.
    • I’ve been taking on small Python projects at work.
  • Joe
    • For my reading pleasure
      • Demon accords
      • Stormlight archive book 1 and 2
      • Looking for something new
      • Going to listen to Andy Weir again
        • Listened to the Martian
          • Really good book
        • Have Artemis in my queue
        • Both great books
      • Used voice aloud for Steven Barnes Aubry Knight book 2
        • A classic book, worth the read.  I like it better than the first book and think the third book is a little weak
    • Pulled the screen from an old laptop and converted the monitor so that I could use it with the Pi 4
      • The connection is relatively simple
      • Fabricating the stand for it was a bit more difficult but only because it is a bit out of my normal wheel house
        • Used a soft board that was very light to do it and repurposed an old tablet stand to hold it in the correct position.
        • Attached the controller board and the pi to the back of the screen as well.  The viewing angle is very narrow but it is working great and has a much lower profile than the other screen i was using for it.
      • Also setup the case of the pi so that it connects to the back of the stand.  It looks pretty good.
    • I have never liked any of the BT receivers that I have purchased.  Granted that may be because i buy the cheap ones.
      • But I do have plenty of broken bluetooth headphones.  
      • Solution:  Bust out the soldering iron and convert an old pair of headphones into a bt receiver giving longer battery life and better sound quality
      • The Sony XB650 is not the simplest choice for this as the battery is on the opposite side to the usb port and controls but the end result is pretty low profile and sounds great.  
      • I was even able to use a 4 pole female 3.5mm adapter and wire into the existing microphone so that my gaming headsets will work properly.  Although i used an old 3.5mm extension cable and this added a problem where the speaker audio was being pumped back through the mic. This can be easily fixed by either putting back in the old mic or replacing the jack with a new one.
      • 10 solder points total the cable was a bit difficult to work with and took longer than it should have to connect the headphone wires.  
      • Moved all the electronics from the left ear to the right ear including the battery and shortened all the cables down to about 2 inches.  Had to shave down the supports at the back of the can so I could put in the battery and controller for it along with the NFC tag. 
      • I have done similar in the past with one of the neck band headphones that i have.  That was much simpler. Some speaker wire from each headphone connection to a 3.5mm female jack.  It works well but not pocket friendly. Although the built-in mic is useful.
    • Also received the DIY desktop headphone amplifier 
      • It was fun to put together
      • Good way to practice through hole soldering
      • There was also some surface mount but that was easy
      • Did not quite get the left channel chip soldered properly on the first try and had to go back and fix it
      • End result is pretty good.  It works as an amp and gives me a knob to control the volume
      • Had to switch from my razer krakens to the neo classics in order to have something that could be pushed with minimal distortion(for testing)
      • Good volume but not great quality
      • What do you expect for 9 bucks
    • Went to the lug on saturday.  Spent a lot of time there writing show notes.
    • My son had fun as well.  I was using my 7130 and he was using the 7140.  
    • Lots of discussion about old school linux and new advances.  Discussed powershell on linux and WSL.
    • Had a root canal.  Can’t say it was fun but i will say it was one of my better visits to the dentist.  I do have to go back for the crown and I have already had the cleaning. Also not fun.  
    • I want to ask if anyone knows what to do about cable hardening on headphones. 
      • Something that happens to some headphone wires as they age.  
      • The only thing I know to do is use a hairdryer to get them into the most comfortable position and then live with it or replace the whole dang cable.
    • Ordered the parts to fix my 3d printer
      • Also ordered the mosfet fix this time too so hopefully i don’t have any further board burnout problems
        • I understand that similar things can happen to the mosfets but they are 10 dollars to replace as opposed to 120
        • Will have to keep a close eye on the first couple of run throughs as I hear that some of the fetts come broken. 
        • Will do a slightly difficult test print and see how it comes out and how much time it takes to dial in.
        • Then a few simple prints to test longevity and because i need more headphone desk hooks. And maybe a stand or two

The News:

Security Update:

Announcements:

  • Our Next Episode will be live March 8th, 2020. 2PM CST, 8PM UTC

Wrap-up:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible … 

  • Josh for all his work on the website and the livestream
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • The Linux Mint development team for the fine distro we love to talk about (Thanks, Clem!)
]]> full 4241 mintCast 329 – fish Pi and Wine (mp3) https://mintcast.org/mintcast-329-fish-pi-and-wine-mp3/ Wed, 26 Feb 2020 06:30:15 +0000 http://mintcast.org/?p=4239 Then in our news, Python 2 is dying, a new kernel is in the works, ElementaryOS is getting devs paid, and more.
In security, we talk more Firefox woes.
Download
]]>

Download

First up, in our Wanderings, I go fishing, Bo has some Wine, and Joe bakes some Pi.

Then in our news, Python 2 is dying, a new kernel is in the works, ElementaryOS is getting devs paid, and more.

In security, we talk more Firefox woes.

Bi-Weekly Wanderings:

  • Leo
    • Been hearing about “FISH” shell for a while, and never figured I’d need anything more than BASH. Well, that’s still true, but FISH is pretty awesome.
    • We missed the news of Fish’s 3.1.0 release back on the 12th.
    • Great for beginners, but can be a double edged sword.
  • Bo
    • Recorded first session of Star Trek Adventures. Check it out at ecnradio.com
    • I could let Leo have the highest kernel version of the show so I installed kernel 5.5 and borked my Mint installation.
    • Running into Wine installation issues on Mint.
    • I’ve been taking on small Python projects at work.
  • Joe
    • For my reading pleasure
      • Demon accords
      • Stormlight archive book 1 and 2
      • Looking for something new
      • Going to listen to Andy Weir again
        • Listened to the Martian
          • Really good book
        • Have Artemis in my queue
        • Both great books
      • Used voice aloud for Steven Barnes Aubry Knight book 2
        • A classic book, worth the read.  I like it better than the first book and think the third book is a little weak
    • Pulled the screen from an old laptop and converted the monitor so that I could use it with the Pi 4
      • The connection is relatively simple
      • Fabricating the stand for it was a bit more difficult but only because it is a bit out of my normal wheel house
        • Used a soft board that was very light to do it and repurposed an old tablet stand to hold it in the correct position.
        • Attached the controller board and the pi to the back of the screen as well.  The viewing angle is very narrow but it is working great and has a much lower profile than the other screen i was using for it.
      • Also setup the case of the pi so that it connects to the back of the stand.  It looks pretty good.
    • I have never liked any of the BT receivers that I have purchased.  Granted that may be because i buy the cheap ones.
      • But I do have plenty of broken bluetooth headphones.  
      • Solution:  Bust out the soldering iron and convert an old pair of headphones into a bt receiver giving longer battery life and better sound quality
      • The Sony XB650 is not the simplest choice for this as the battery is on the opposite side to the usb port and controls but the end result is pretty low profile and sounds great.  
      • I was even able to use a 4 pole female 3.5mm adapter and wire into the existing microphone so that my gaming headsets will work properly.  Although i used an old 3.5mm extension cable and this added a problem where the speaker audio was being pumped back through the mic. This can be easily fixed by either putting back in the old mic or replacing the jack with a new one.
      • 10 solder points total the cable was a bit difficult to work with and took longer than it should have to connect the headphone wires.  
      • Moved all the electronics from the left ear to the right ear including the battery and shortened all the cables down to about 2 inches.  Had to shave down the supports at the back of the can so I could put in the battery and controller for it along with the NFC tag. 
      • I have done similar in the past with one of the neck band headphones that i have.  That was much simpler. Some speaker wire from each headphone connection to a 3.5mm female jack.  It works well but not pocket friendly. Although the built-in mic is useful.
    • Also received the DIY desktop headphone amplifier 
      • It was fun to put together
      • Good way to practice through hole soldering
      • There was also some surface mount but that was easy
      • Did not quite get the left channel chip soldered properly on the first try and had to go back and fix it
      • End result is pretty good.  It works as an amp and gives me a knob to control the volume
      • Had to switch from my razer krakens to the neo classics in order to have something that could be pushed with minimal distortion(for testing)
      • Good volume but not great quality
      • What do you expect for 9 bucks
    • Went to the lug on saturday.  Spent a lot of time there writing show notes.
    • My son had fun as well.  I was using my 7130 and he was using the 7140.  
    • Lots of discussion about old school linux and new advances.  Discussed powershell on linux and WSL.
    • Had a root canal.  Can’t say it was fun but i will say it was one of my better visits to the dentist.  I do have to go back for the crown and I have already had the cleaning. Also not fun.  
    • I want to ask if anyone knows what to do about cable hardening on headphones. 
      • Something that happens to some headphone wires as they age.  
      • The only thing I know to do is use a hairdryer to get them into the most comfortable position and then live with it or replace the whole dang cable.
    • Ordered the parts to fix my 3d printer
      • Also ordered the mosfet fix this time too so hopefully i don’t have any further board burnout problems
        • I understand that similar things can happen to the mosfets but they are 10 dollars to replace as opposed to 120
        • Will have to keep a close eye on the first couple of run throughs as I hear that some of the fetts come broken. 
        • Will do a slightly difficult test print and see how it comes out and how much time it takes to dial in.
        • Then a few simple prints to test longevity and because i need more headphone desk hooks. And maybe a stand or two

The News:

Security Update:

Announcements:

  • Our Next Episode will be live March 8th, 2020. 2PM CST, 8PM UTC

Wrap-up:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible … 

  • Josh for all his work on the website and the livestream
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • The Linux Mint development team for the fine distro we love to talk about (Thanks, Clem!)
]]> full 4239 mintCast 324 – Attack of the Releases https://mintcast.org/mintcast-324-attack-of-the-releases/ Wed, 18 Dec 2019 17:35:23 +0000 http://mintcast.org/?p=4060 Then, in our news, Linux Mint 19.3 is almost here, Canonical has been very busy, New elementaryOS and Firefox, and more
In security, two Linux vulnerabilities and a takeover of PIA goes weird
Download
]]>

Download

First up, in our Wanderings, Leo suffers from new computer ills, Tony Hughes works on his cars, Moss fiddles with more distros, it’s reading and repairs for Joe, Tony Watts is rockin’ it, and Josh goes mad and gets an iPhone.

Then, in our news, Linux Mint 19.3 is almost here, Canonical has been very busy, New elementaryOS and Firefox, and more

In security, two Linux vulnerabilities and a takeover of PIA goes weird

BI-WEEKLY WANDERINGS:

  • Leo
    • Finally saved up and got the 5700XT I’ve been drooling over for months.
      • Works great in Windows
      • Not so much in Linux Mint. There was some really bad mouse stutter that really impacted desktop performance and made most games unplayable. I was on the latest development Mesa, version 20, but Kernel 5.3.
      • Had a Manjaro Gnome install that I knew was on a later kernel (5.4.2), and 5.4 had some Navi improvements that affected my card. Tried it, and the desktop was smooth, however, nothing I tried would let me play games. They would freeze and never recover. It was so bad that I couldn’t even hop to a new TTY.
      • Installed UKUU on Mint and upgraded to 5.4.2. Mint wins again.
    • While I was troubleshooting, and using Windows to play games, I couldn’t get over how much my workflow was tied to Linux. I’m glad to be back on Mint.
    • Got the wife a new AData SU800 512GB SSD and she gets my hand-me-down Radeon 380x. Both will be a nice upgrade for her.
  • Tony H 
    • Recorded Distrohoppers with Moss, and this went well.
    • Continuing to play with my diecast models and a few more were delivered this week, some of which were in quite good condition for their age so will be added to the display collection until something better comes along. I restored a Matchbox No. 5c Routemaster London Bus this week and just need to add the advertising decals, which I don’t currently have. I am planning to make my own but need both the decal paper and a colour inkjet or laser printer but as a set of decals for one model can be between £2-3 in the long run it will be cheaper to make my own and I could probably make some for sale as well.
    • I also got a portable spray booth and Airbrush with a mini compressor as Birthday gifts this week, I’ve set up the spray booth in my office/workshop in the spare bedroom and plan to test it out next week before heading up to Scotland until Xmas eve to visit my step son and brother in law.
    • Having new UPVC windows fitted to my garage in preparation for turning it into the Makerspace Workshop. When we lost our last venue we lost the ability to use the Laser cutter and 3D printer as we can not install these at our current meeting venue of one of our local libraries.
    • Joined the BDLL Euro show last night.     
  • Moss 
    • We had a great Episode 008 for Distrohoppers’ Digest, available now at your favorite podcatcher or from our website, http://distrohoppersdigest.blogspot.com. This will be our last one for the year, and our next episode will be more laid back, although I’ve already installed KDE neon on my test machine.
    • I attempted to install Haiku OS on my Kudu, but learned it does not install to UEFI, so I broke out the still-unposted IdeaPad 110. I got to a certain point, and ran into informational vacuum, needing to know how to prepare the partition. I did get a nice response from the team, but have not been able to get back to it.  I learned a lot just getting that far, and maybe I’ll go on from there soon.
    • I attempted to install  Peppermint OS 10 to my test laptop. The partitioning failed. The installer crashed the second try. I reinstalled KDE neon.
    • Sabayon was refusing to load the desktop lately. I could not log in as my username, but logging in as root got me a full-screen terminal. I posted the issue to the Sabayon forum and got a quick reply. Stating that I needed to reload lightdm, with instructions as to how. That worked. As I doubt any of our listeners are running Sabayon, I won’t post the commands I used to fix the issue.
    • I did some Timeshift backups today. I keep infrequent backups of everything except Sabayon (haven’t figured out how to load Timeshift through Entropy). As part of my efforts today, I learned that my Galago Pro identifies the external backup drive as sdb, and then finds I don’t have an sdb5, which is where my Linux Mint is installed (Pearl on sdb3). So I need to keep it unplugged until after boot, or I can’t boot to either Mint or Pearl. Odd that it isn’t identified as sdcX…
    • I had a pretty good birthday, with a pleasant gift from my mother and a lot of good wishes, plus extra hours being offered at work. I have stopped looking for work, with only one possible job not yet offered. Also, a great Thanksgiving and even a Holiday Party, with my friends at the Narrow Ridge Earth Literacy Education Center in Liberty Hill, TN. My wife and I feel we have found a new family.
    • And I received a donation from one of our listeners, David Lindberg. Thank you, David!  I purchased some much-needed USB-C cables.
  • Joe
    • Finished relistening to the Dresden files.  Love that series. Can’t recommend enough to everyone
      • Very well read
      • Good long series that takes some time to get through even at 4x
      • Too long since the last one but the author has had to work through a lot of issues and from what I understand the wait should not be long now.
    • Also went through the Incarnations of Immortality series by Piers Anthony
      • This is a very convoluted series where all the books are very intertwined
      • Well read and well written
    • Need to catch up on Rick and Morty new season.
    • Behind on all the tv shows.
    • Bought some LG HBS 510’s 
      • Kinda old school
      • ordered 4 for 15 dollars
      • 1 no power show fully charged
      • Battery is working fine.  Can’t find a problem with the switch.  could check all the wires across for continuity.  But won’t. need the extra parts anyway
      • One of the sides went on another set
      • 1 neither side works but connects and pause play works
        • This will probably just require shortening of the cables
      • 1 left side out 
        • obvious, the casing was cracked around the earpiece and I could see that one of the connections was off.  soldered back on and glued the casing together with jb weld. It works great may go back and fill the hole with JB Weld 
      • 1 right side out, as in it is not there.  Another cracked casing but the speaker fell off
        • Was able to take one side from the one that wont turn on and swap it in.  now it just plain works
      • Should be able to fix 3.   
      • had extra glue so also glued one of the 820s with a broken band.
        • But it did not hold very well even after a couple of days worth of drying
      • The 510s are smaller and have fewer buttons than most of the ones that I have worked with but are still usable.  the sound is not terrible and they are not too difficult to work on. a single large mic that will require more testing.  Battery life is middling. the materials are a bit flimsy considering some of the fixes that I had to put in but they are also the lightest neckband headset I have used.  No one has complained about the call quality and I have not had any issue on my side of a call. the simplistic controls do take a bit of getting used to, especially when I am still switching amongst other headsets with a more standard setup.
    • Ordered another Dell Venue 7130 for 40 dollars.  Don’t know much about it yet other than it is missing the M.2 hard drive.  But it is the i5 version so it is either 4 or 8gb version.  
      • I have extra drives for it
      • Will find out if it has a good battery
      • And a good charging port
      • But there are 2 charging ports so if the usb one is bad I may have to either buy a dock or one of the high powered ones that use the same port
      • If I get it working I will either turn around and sell it or give it to one of my kids.
    • Fixed my dad’s old Toshiba Satellite L755-S5110
      • It had this problem where during startup it would get past the splash screen and start beeping horrendously
      • Figured it was the ram so I pulled the ram sticks one at a time and tested with less ram and known good ram still the same issue
      • So I removed the keyboard and started it up.  Worked fine.
      • Tested rehooking the keyboard while it was booted and it is always triggering some keys.
      • May order a new keyboard or may just use it as a settop box.
      • Second gen core i3 but still usable.  
      • Does need a new battery
      • But other than that, it would cost 20 dollars, 13 for the keyboard and 7 for the power supply to have a working laptop
      • Like 12 dollars for a battery.
    • Also was having a problem with my garage computer randomly shutting off.
      • Hard to isolate the problem because days could go by without it happening
      • After much testing of peripherals to find the issue I discovered that it was a problem with my Thinkpad USB 3.0 docking station
      • So I am looking for a decent low cost powered replacement (probably a couple of them) 
      • Preferably 7 ports and sub 10 dollars but I am not finding anything that fits the bill. 
    • Bought a Samsung gear fit2
      • Not sure how much I like it.
      • Heart rate is iffy 
      • Step count I will have to track more
  • Tony W
    • Busy as ever with music.  
      • Formed a band of my colleagues at the office and we played at the company holiday party.  It was a resounding success.  
      • Speaking of holiday party… will be doing to my wife’s work party toward end of our show, may have to drop a bit early
      • Also solo gigs, rock band, church band…
    • Mobile recording setup:
      • Dell 7130
      • Presonus Audiobox USB
        • Metal – built like a tank
        • Works out of the box with Linux, no problems whatsoever
        • Very light and portable
        • Power draws from USB – no power plug required
      • Unidirectional microphone (Either my Behringer or a borrowed Shure SM58 – doesn’t seem to be a dramatic difference)
        • I use a unidirectional mic to avoid picking up noise in my house (space heater and server right next to me, not to mention anything else in the rest of the house, kids, dogs…)
    • Dell 7130
      • Spent more time with the machine after it being a bit idle for a while.  I tend to spend a lot of time *obsessively* getting things to work like I want, and then walk away from them after that is accomplished.
      • Batteries in both tablet and keyboard actually seem to be in pretty good shape.  Linux mint indicates keyboard will last nearly 3 hours and the tablet about 7.5 hrs (have not tested this, no idea if will actually get that much, but so far can confirm the keyboard will last 2+ hrs charging the tablet)
      • Keyboard is very glitchy.  Have to dock multiple times before the tablet will recognize keyboard/touchpad (even though battery display seems to update every time)
      • Ordered a tablet keyboard cover, maybe less issues.  Will report back on that
    • New work laptop
      • Old: Dell E6430
        • I used that laptop for 7+ years.  IT dept delayed in replacing it as it was up to spec after various upgrades
        • Processor 3rd gen i7, 8GB Ram, 500GB SSD, new battery…
        • Replaced due to touchpad button issues (may have been a Windows only problem)
      • New: Thinkpad T480.  Great machine
        • I7 model
        • I will need a USB C dock now, for working at home
  • Josh
    • Finished my mock exams (finally) after two weeks. Sorry for the absence but they say school comes first (whatever that means).
    • Released Issue 6 of micro:mag, our most popular issue yet where we got 2000 readers in the first 48 hours.
    • Got myself some 8BitDo Bluetooth Stereo Speakers after winning a gift card during a Black Friday competition. Really good for the price and work well with Linux.
    • Last time I was on the show, I was having some trouble with Google after my Pixel 3 got RMAed.
      • 3 Months of battling with them
      • Support engineers cut me off the phone a few times
      • They can’t contact the refunds team
      • Google support is the worst
      • I really don’t want to be negative, but this has happened to many other customers too
      • We contacted the retailer where I got the phone from, John Lewis, who refunded me after trying Google support from themselves and seeing how bad it was.
    • I ended up getting the iPhone 11 Pro on a really good contract with o2 here in the UK after putting some of the refund money towards it.
      • iOS is really nice
      • Camera is incredible, especially the 4k60 video
      • Smooth performance
      • 2 Day Battery life
      • Apple devices are still too expensive and i’d never buy one outright but luckily thanks to a mix of Black Friday deals and putting a bit of money upfront from what I did have. 

THE NEWS: 

  • Linux Mint 19.3 Images Being Tested
    • Images showed up on Friday, marked as testing. Release is imminent!
  • Canonical announces Ubuntu Pro for AWS
    • These images, for a little extra money, provide 10 years of support, Kernel Livepatching, Compliance profiles for things like HIPAA and PCI, and AWS Security integration.
  • Ubuntu AWS Will Use A Rolling Kernel
    • For non Ubuntu Pro instances, you’ll still be getting some goodies.
    • The rolling kernel is the typical hardware enablement kernel with AWS features built in, and all 18.04 instances will be upgraded to 5.0 from 4.15 by default.
    • You can test early to be sure things will work
      • sudo apt install linux-aws-edge
    • Or you can force your instances to stay on 4.15.
      • sudo apt install linux-aws-lts-18.04
  • Canonical Becomes Feature Sponsor for WSLConf
    • Hayden Barnes, Developer Advocate, Ubuntu on WSL, Canonical
  • Nginx offices raided for copyright dispute with Rambler (Moss)
  • Open Source Music Notations Software Musescore 3.3 Released! (Tony W)
    • For playing, printing and creating sheet music
    • Free but can use either a free or premium account for sharing with Musescore community
  • elementary OS 5.1 Hera
    • A new Greeter and first-install process
    • Flatpak Support
    • Accessibility being treated as normal options rather than things shoved away into a corner.
    • Ubuntu’s HWE 5.0 Kernel.
    • Some app improvements
    • If you’re upgrading from Juno, you won’t get the new kernel automatically. For that, run:
      • sudo apt install –install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04
  • Firefox 71
    • Picture in Picture for videos! (Windows only for now. Linux and Mac in Firefox 72)
    • Native MP3 decoding on Windows, Linux, and macOS
    • More visible tracking protection
    • Improvements to Lockwise
    • Kiosk mode
  • Zorin OS 15.1 released (Moss)
  • Ubuntu Cinnamon first release (not official flavor yet)
  • MS Teams Is Now On Linux (second link)
  • Mac Pro is here (Josh)
    • Probably one of the most powerful consumer computers out there
    • Comes with a price for the top spec – $52,748.00
      • 2.5GHz 28‑core Intel Xeon W processor, Turbo Boost up to 4.4GHz
      • 1.5TB (12x128GB) of DDR4 ECC memory
      • Two Radeon Pro Vega II Duo with 2x32GB of HBM2 memory each
      • 4TB SSD storage
      • Apple Afterburner card
      • Stainless steel frame with wheels
      • Magic Mouse 2 + Magic Trackpad 2
      • Magic Keyboard with Numeric Keypad – US English
    • Base spec is $6,000 which is very expensive for what you get
      • 3.5GHz 8‑core Intel Xeon W processor, Turbo Boost up to 4.0GHz
      • 32GB (4x8GB) of DDR4 ECC memory
      • Radeon Pro 580X with 8GB of GDDR5 memory
      • 256GB SSD storage
      • Stainless steel frame with feet
      • Magic Mouse 2
      • Magic Keyboard with Numeric Keypad – US English

SECURITY UPDATE: 

  • <Moss>Remember the PIA purchase by Kape Technologies? Kape is a renamed malware company owned by a former Israeli spy (not from right wing sources)
  • New Linux Vulnerability Lets Attackers Hijack VPN Connections
    • Very in depth, but the short and sweet of it is that using this vulnerability allows an attacker to inject packets regardless of encryption.
    • People with a version of systemd released after Nov 28th, 2019 are affected. However, more distributions that aren’t on systemd are affected: Devuan, Void, FreeBSD.
    • A temporary fix would be to block bogon IP addresses. Essentially bogus or fake IPs. See: https://ipinfo.io/bogon 
  • Two malicious Python scripts caught stealing SSH and GPG keys
    • A result of typosquatting. Essentially naming libraries visually similar to confuse people into using the library.
    • Python3-dateutil was spoofing dateutil
    • JeIlyfish (the first l is replaced with a capital I) was spoofing Jellyfish. The spoofed JeIlyfish libraries were where the malicious code resided, and python3-dateutil would call the malicious JeIlyfish library.

Once the libraries are used, keys are sent to xxx://68.183.212.246:32258

ANNOUNCEMENTS:

  • Next Episode will be December 29, 2019, 2pm Central US time.

WRAP-UP:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Josh for all his work on the website and the livestream
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • The Linux Mint development team for the fine distro we love to talk about (Thanks, Clem!)
]]> full 4060 mintCast 324 – Attack of the Releases (mp3) https://mintcast.org/mintcast-324-attack-of-the-releases-mp3/ Wed, 18 Dec 2019 17:35:14 +0000 http://mintcast.org/?p=4055 Then, in our news, Linux Mint 19.3 is almost here, Canonical has been very busy, New elementaryOS and Firefox, and more
In security, two Linux vulnerabilities and a takeover of PIA goes weird
Download
]]>

Download

First up, in our Wanderings, Leo suffers from new computer ills, Tony Hughes works on his cars, Moss fiddles with more distros, it’s reading and repairs for Joe, Tony Watts is rockin’ it, and Josh goes mad and gets an iPhone.

Then, in our news, Linux Mint 19.3 is almost here, Canonical has been very busy, New elementaryOS and Firefox, and more

In security, two Linux vulnerabilities and a takeover of PIA goes weird

BI-WEEKLY WANDERINGS:

  • Leo
    • Finally saved up and got the 5700XT I’ve been drooling over for months.
      • Works great in Windows
      • Not so much in Linux Mint. There was some really bad mouse stutter that really impacted desktop performance and made most games unplayable. I was on the latest development Mesa, version 20, but Kernel 5.3.
      • Had a Manjaro Gnome install that I knew was on a later kernel (5.4.2), and 5.4 had some Navi improvements that affected my card. Tried it, and the desktop was smooth, however, nothing I tried would let me play games. They would freeze and never recover. It was so bad that I couldn’t even hop to a new TTY.
      • Installed UKUU on Mint and upgraded to 5.4.2. Mint wins again.
    • While I was troubleshooting, and using Windows to play games, I couldn’t get over how much my workflow was tied to Linux. I’m glad to be back on Mint.
    • Got the wife a new AData SU800 512GB SSD and she gets my hand-me-down Radeon 380x. Both will be a nice upgrade for her.
  • Tony H 
    • Recorded Distrohoppers with Moss, and this went well.
    • Continuing to play with my diecast models and a few more were delivered this week, some of which were in quite good condition for their age so will be added to the display collection until something better comes along. I restored a Matchbox No. 5c Routemaster London Bus this week and just need to add the advertising decals, which I don’t currently have. I am planning to make my own but need both the decal paper and a colour inkjet or laser printer but as a set of decals for one model can be between £2-3 in the long run it will be cheaper to make my own and I could probably make some for sale as well.
    • I also got a portable spray booth and Airbrush with a mini compressor as Birthday gifts this week, I’ve set up the spray booth in my office/workshop in the spare bedroom and plan to test it out next week before heading up to Scotland until Xmas eve to visit my step son and brother in law.
    • Having new UPVC windows fitted to my garage in preparation for turning it into the Makerspace Workshop. When we lost our last venue we lost the ability to use the Laser cutter and 3D printer as we can not install these at our current meeting venue of one of our local libraries.
    • Joined the BDLL Euro show last night.     
  • Moss 
    • We had a great Episode 008 for Distrohoppers’ Digest, available now at your favorite podcatcher or from our website, http://distrohoppersdigest.blogspot.com. This will be our last one for the year, and our next episode will be more laid back, although I’ve already installed KDE neon on my test machine.
    • I attempted to install Haiku OS on my Kudu, but learned it does not install to UEFI, so I broke out the still-unposted IdeaPad 110. I got to a certain point, and ran into informational vacuum, needing to know how to prepare the partition. I did get a nice response from the team, but have not been able to get back to it.  I learned a lot just getting that far, and maybe I’ll go on from there soon.
    • I attempted to install  Peppermint OS 10 to my test laptop. The partitioning failed. The installer crashed the second try. I reinstalled KDE neon.
    • Sabayon was refusing to load the desktop lately. I could not log in as my username, but logging in as root got me a full-screen terminal. I posted the issue to the Sabayon forum and got a quick reply. Stating that I needed to reload lightdm, with instructions as to how. That worked. As I doubt any of our listeners are running Sabayon, I won’t post the commands I used to fix the issue.
    • I did some Timeshift backups today. I keep infrequent backups of everything except Sabayon (haven’t figured out how to load Timeshift through Entropy). As part of my efforts today, I learned that my Galago Pro identifies the external backup drive as sdb, and then finds I don’t have an sdb5, which is where my Linux Mint is installed (Pearl on sdb3). So I need to keep it unplugged until after boot, or I can’t boot to either Mint or Pearl. Odd that it isn’t identified as sdcX…
    • I had a pretty good birthday, with a pleasant gift from my mother and a lot of good wishes, plus extra hours being offered at work. I have stopped looking for work, with only one possible job not yet offered. Also, a great Thanksgiving and even a Holiday Party, with my friends at the Narrow Ridge Earth Literacy Education Center in Liberty Hill, TN. My wife and I feel we have found a new family.
    • And I received a donation from one of our listeners, David Lindberg. Thank you, David!  I purchased some much-needed USB-C cables.
  • Joe
    • Finished relistening to the Dresden files.  Love that series. Can’t recommend enough to everyone
      • Very well read
      • Good long series that takes some time to get through even at 4x
      • Too long since the last one but the author has had to work through a lot of issues and from what I understand the wait should not be long now.
    • Also went through the Incarnations of Immortality series by Piers Anthony
      • This is a very convoluted series where all the books are very intertwined
      • Well read and well written
    • Need to catch up on Rick and Morty new season.
    • Behind on all the tv shows.
    • Bought some LG HBS 510’s 
      • Kinda old school
      • ordered 4 for 15 dollars
      • 1 no power show fully charged
      • Battery is working fine.  Can’t find a problem with the switch.  could check all the wires across for continuity.  But won’t. need the extra parts anyway
      • One of the sides went on another set
      • 1 neither side works but connects and pause play works
        • This will probably just require shortening of the cables
      • 1 left side out 
        • obvious, the casing was cracked around the earpiece and I could see that one of the connections was off.  soldered back on and glued the casing together with jb weld. It works great may go back and fill the hole with JB Weld 
      • 1 right side out, as in it is not there.  Another cracked casing but the speaker fell off
        • Was able to take one side from the one that wont turn on and swap it in.  now it just plain works
      • Should be able to fix 3.   
      • had extra glue so also glued one of the 820s with a broken band.
        • But it did not hold very well even after a couple of days worth of drying
      • The 510s are smaller and have fewer buttons than most of the ones that I have worked with but are still usable.  the sound is not terrible and they are not too difficult to work on. a single large mic that will require more testing.  Battery life is middling. the materials are a bit flimsy considering some of the fixes that I had to put in but they are also the lightest neckband headset I have used.  No one has complained about the call quality and I have not had any issue on my side of a call. the simplistic controls do take a bit of getting used to, especially when I am still switching amongst other headsets with a more standard setup.
    • Ordered another Dell Venue 7130 for 40 dollars.  Don’t know much about it yet other than it is missing the M.2 hard drive.  But it is the i5 version so it is either 4 or 8gb version.  
      • I have extra drives for it
      • Will find out if it has a good battery
      • And a good charging port
      • But there are 2 charging ports so if the usb one is bad I may have to either buy a dock or one of the high powered ones that use the same port
      • If I get it working I will either turn around and sell it or give it to one of my kids.
    • Fixed my dad’s old Toshiba Satellite L755-S5110
      • It had this problem where during startup it would get past the splash screen and start beeping horrendously
      • Figured it was the ram so I pulled the ram sticks one at a time and tested with less ram and known good ram still the same issue
      • So I removed the keyboard and started it up.  Worked fine.
      • Tested rehooking the keyboard while it was booted and it is always triggering some keys.
      • May order a new keyboard or may just use it as a settop box.
      • Second gen core i3 but still usable.  
      • Does need a new battery
      • But other than that, it would cost 20 dollars, 13 for the keyboard and 7 for the power supply to have a working laptop
      • Like 12 dollars for a battery.
    • Also was having a problem with my garage computer randomly shutting off.
      • Hard to isolate the problem because days could go by without it happening
      • After much testing of peripherals to find the issue I discovered that it was a problem with my Thinkpad USB 3.0 docking station
      • So I am looking for a decent low cost powered replacement (probably a couple of them) 
      • Preferably 7 ports and sub 10 dollars but I am not finding anything that fits the bill. 
    • Bought a Samsung gear fit2
      • Not sure how much I like it.
      • Heart rate is iffy 
      • Step count I will have to track more
  • Tony W
    • Busy as ever with music.  
      • Formed a band of my colleagues at the office and we played at the company holiday party.  It was a resounding success.  
      • Speaking of holiday party… will be doing to my wife’s work party toward end of our show, may have to drop a bit early
      • Also solo gigs, rock band, church band…
    • Mobile recording setup:
      • Dell 7130
      • Presonus Audiobox USB
        • Metal – built like a tank
        • Works out of the box with Linux, no problems whatsoever
        • Very light and portable
        • Power draws from USB – no power plug required
      • Unidirectional microphone (Either my Behringer or a borrowed Shure SM58 – doesn’t seem to be a dramatic difference)
        • I use a unidirectional mic to avoid picking up noise in my house (space heater and server right next to me, not to mention anything else in the rest of the house, kids, dogs…)
    • Dell 7130
      • Spent more time with the machine after it being a bit idle for a while.  I tend to spend a lot of time *obsessively* getting things to work like I want, and then walk away from them after that is accomplished.
      • Batteries in both tablet and keyboard actually seem to be in pretty good shape.  Linux mint indicates keyboard will last nearly 3 hours and the tablet about 7.5 hrs (have not tested this, no idea if will actually get that much, but so far can confirm the keyboard will last 2+ hrs charging the tablet)
      • Keyboard is very glitchy.  Have to dock multiple times before the tablet will recognize keyboard/touchpad (even though battery display seems to update every time)
      • Ordered a tablet keyboard cover, maybe less issues.  Will report back on that
    • New work laptop
      • Old: Dell E6430
        • I used that laptop for 7+ years.  IT dept delayed in replacing it as it was up to spec after various upgrades
        • Processor 3rd gen i7, 8GB Ram, 500GB SSD, new battery…
        • Replaced due to touchpad button issues (may have been a Windows only problem)
      • New: Thinkpad T480.  Great machine
        • I7 model
        • I will need a USB C dock now, for working at home
  • Josh
    • Finished my mock exams (finally) after two weeks. Sorry for the absence but they say school comes first (whatever that means).
    • Released Issue 6 of micro:mag, our most popular issue yet where we got 2000 readers in the first 48 hours.
    • Got myself some 8BitDo Bluetooth Stereo Speakers after winning a gift card during a Black Friday competition. Really good for the price and work well with Linux.
    • Last time I was on the show, I was having some trouble with Google after my Pixel 3 got RMAed.
      • 3 Months of battling with them
      • Support engineers cut me off the phone a few times
      • They can’t contact the refunds team
      • Google support is the worst
      • I really don’t want to be negative, but this has happened to many other customers too
      • We contacted the retailer where I got the phone from, John Lewis, who refunded me after trying Google support from themselves and seeing how bad it was.
    • I ended up getting the iPhone 11 Pro on a really good contract with o2 here in the UK after putting some of the refund money towards it.
      • iOS is really nice
      • Camera is incredible, especially the 4k60 video
      • Smooth performance
      • 2 Day Battery life
      • Apple devices are still too expensive and i’d never buy one outright but luckily thanks to a mix of Black Friday deals and putting a bit of money upfront from what I did have. 

THE NEWS: 

  • Linux Mint 19.3 Images Being Tested
    • Images showed up on Friday, marked as testing. Release is imminent!
  • Canonical announces Ubuntu Pro for AWS
    • These images, for a little extra money, provide 10 years of support, Kernel Livepatching, Compliance profiles for things like HIPAA and PCI, and AWS Security integration.
  • Ubuntu AWS Will Use A Rolling Kernel
    • For non Ubuntu Pro instances, you’ll still be getting some goodies.
    • The rolling kernel is the typical hardware enablement kernel with AWS features built in, and all 18.04 instances will be upgraded to 5.0 from 4.15 by default.
    • You can test early to be sure things will work
      • sudo apt install linux-aws-edge
    • Or you can force your instances to stay on 4.15.
      • sudo apt install linux-aws-lts-18.04
  • Canonical Becomes Feature Sponsor for WSLConf
    • Hayden Barnes, Developer Advocate, Ubuntu on WSL, Canonical
  • Nginx offices raided for copyright dispute with Rambler (Moss)
  • Open Source Music Notations Software Musescore 3.3 Released! (Tony W)
    • For playing, printing and creating sheet music
    • Free but can use either a free or premium account for sharing with Musescore community
  • elementary OS 5.1 Hera
    • A new Greeter and first-install process
    • Flatpak Support
    • Accessibility being treated as normal options rather than things shoved away into a corner.
    • Ubuntu’s HWE 5.0 Kernel.
    • Some app improvements
    • If you’re upgrading from Juno, you won’t get the new kernel automatically. For that, run:
      • sudo apt install –install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04
  • Firefox 71
    • Picture in Picture for videos! (Windows only for now. Linux and Mac in Firefox 72)
    • Native MP3 decoding on Windows, Linux, and macOS
    • More visible tracking protection
    • Improvements to Lockwise
    • Kiosk mode
  • Zorin OS 15.1 released (Moss)
  • Ubuntu Cinnamon first release (not official flavor yet)
  • MS Teams Is Now On Linux (second link)
  • Mac Pro is here (Josh)
    • Probably one of the most powerful consumer computers out there
    • Comes with a price for the top spec – $52,748.00
      • 2.5GHz 28‑core Intel Xeon W processor, Turbo Boost up to 4.4GHz
      • 1.5TB (12x128GB) of DDR4 ECC memory
      • Two Radeon Pro Vega II Duo with 2x32GB of HBM2 memory each
      • 4TB SSD storage
      • Apple Afterburner card
      • Stainless steel frame with wheels
      • Magic Mouse 2 + Magic Trackpad 2
      • Magic Keyboard with Numeric Keypad – US English
    • Base spec is $6,000 which is very expensive for what you get
      • 3.5GHz 8‑core Intel Xeon W processor, Turbo Boost up to 4.0GHz
      • 32GB (4x8GB) of DDR4 ECC memory
      • Radeon Pro 580X with 8GB of GDDR5 memory
      • 256GB SSD storage
      • Stainless steel frame with feet
      • Magic Mouse 2
      • Magic Keyboard with Numeric Keypad – US English

SECURITY UPDATE: 

  • <Moss>Remember the PIA purchase by Kape Technologies? Kape is a renamed malware company owned by a former Israeli spy (not from right wing sources)
  • New Linux Vulnerability Lets Attackers Hijack VPN Connections
    • Very in depth, but the short and sweet of it is that using this vulnerability allows an attacker to inject packets regardless of encryption.
    • People with a version of systemd released after Nov 28th, 2019 are affected. However, more distributions that aren’t on systemd are affected: Devuan, Void, FreeBSD.
    • A temporary fix would be to block bogon IP addresses. Essentially bogus or fake IPs. See: https://ipinfo.io/bogon 
  • Two malicious Python scripts caught stealing SSH and GPG keys
    • A result of typosquatting. Essentially naming libraries visually similar to confuse people into using the library.
    • Python3-dateutil was spoofing dateutil
    • JeIlyfish (the first l is replaced with a capital I) was spoofing Jellyfish. The spoofed JeIlyfish libraries were where the malicious code resided, and python3-dateutil would call the malicious JeIlyfish library.

Once the libraries are used, keys are sent to xxx://68.183.212.246:32258

ANNOUNCEMENTS:

  • Next Episode will be December 29, 2019, 2pm Central US time.

WRAP-UP:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Josh for all his work on the website and the livestream
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • The Linux Mint development team for the fine distro we love to talk about (Thanks, Clem!)
]]> full 4055