mintCast 322 – The Linux Defender

Download

First up, in our Wanderings, Leo picks up a hard drive docking station, Tony tests the new Gnome, Moss fights overscanning, and Joe volunteers for Full Circle — And last minute guest Oliver Kelly

Then, in the news, Microsoft is working overtime, Docker gets a second wind, new Debian updates, big .org changes, and more.

In security, Microsoft brings Defender ATP to Linux, and another speculative execution vulnerability.

BI-WEEKLY WANDERINGS:

  • Leo
    • Got a new hard drive docking station.
    • Working on news hunting and gathering up some reliable sources to pull from. Some staff changes at Full Circle means that I’ll be gathering up a lot, if not all, of my news myself.
    • So far, so good. Plenty of things to cover, which means that the show here will pull from the same pot!
  • Tony H 
    • Continuing to work with the Ubuntu 19.10 Gnome install on the test laptop for Distrohoppers Digest, I’m actually starting to get used to some of the differences in DE layout. After the install of the Arc menu things are a little easier to navigate, and I am finding myself resorting to the keyboard for some of the things I would normally use the mouse/trackpad for.
    • Buying more Matchbox diecast models from the 50’s, 60’s and 70’s and getting some real bargains off Ebay. I have bought a drill for drilling out the rivets and have started to dismantle a few of the poorer condition models apart with a view to starting a restoration. I’ll let you know how it goes.
    • It’s a good job we postponed the next DH recording as I’ve got another funeral to attend which would have made me unavailable to record. Otherwise life is starting to stabilize a little with my health back on the up and feeling a little more like normal (whatever that is)     
  • Moss
    • I’ve been working slowly on my next review for Distrohoppers’ Digest. Some interesting things going on in Zorin OS.
    • I can’t seem to keep my power supply plug plugged into my Galago Pro 2. If it just moves a tiny fraction of a millimeter it stops charging. I’m not sure what to do about that, other than to keep an eye on the battery icon on my desktop.
    • I received a Raspberry Pi 3B with a Pimoroni clear case from Tony Hughes via George Doscher of Tech + Coffee (Thanks, Tony and George!). Handing this little item off to George at OggCamp saved Tony quite a few quid in postage, and George, I am told, refused to accept money from Tony for US postage. 
    • So I plugged in and started up the Pi 3B while my Galago Pro was running. The Pi was on HDMI-1 and the Galago Pro was on HDMI-3 on my TV/monitor. The Pi worked great, but when I switched the monitor over to HDMI-3, my Linux Mint was badly overscanned (about 20%) so I could barely use it. I changed resolution to 1480×720 and it worked, but of course everything was so much larger. I later discovered that it had the same effect on my Bodhi 5.1 installation, which was doubly weird and not as easy to fix (ARndR is much harder to work with on an overscanned screen than Displays is), but there was no effect at all on my installs of Pearl Desktop 8 (based on Ubuntu 19.04), Ubuntu Budgie 19.10, or Q4OS (Debian 10 Buster). Apparently it triggered something in 18.04 code *only*. The fix ultimately was to change the Galago Pro to HDMI-2, and it’s a good thing the TV has 3 HDMI inputs. The guys in the mintCast Telegram group tried to talk me into plugging in the Pi again to prove the concept, but I decided I had my system working and wanted to keep it that way.
    • Dale Miracle sent a nice donation, including a new Logitech M570 trackball. Thank you, Dale.  I now have all the tech stuff I can use at the present time, and still have two laptops for sale as well as a few other miscellaneous bits of gear.
    • Just before the show, I got the proverbial wild hair up my patootie to set up a new partition on my 1 Tb drive in the Galago Pro 2. So I did. GPartEd performed like a champ. I shrunk sda1 to 250 Gb, and then shrunk sda3 the other way — forcing GPartEd to copy files to a new location on the partition. While that is scary, and while they say it CAN destroy files, once again GPartEd performed like a champ and did everything without a hitch. And I learned something — I thought you could only have 3 Primary partitions on a drive, but I now have 4. Sda4 is now formatted and waiting for a new distro to be put on it. I’m going to go out on a limb and try Sabayon first.
    • Reading-wise we are on Empire of Jade, the second Temeraire book by Naomi Novik, moving slowly as we’ve had quite a few crises keeping me busy until it was too sleepy out to read.
  • Joe
    • Demon Accords by John Conroe
      • Once again an OK series.
      • Some of the downside of the series is the main character is just way too OP
      • But my main issue with it has to do with the reader.  I will have to pick up a copy of the book because through the first half of the series the reader makes all the speakers sound like they are asking a question.  It is a bit distracting.  
      • I will say that the reader greatly improved later on and I did end up liking the story especially with the introduction of some of the other main characters.
    • Jack Campbell – The Lost Fleet Beyond the Frontier [1-5]
      • Good read.  Didn’t realize it was a sequel series until I had started it
      • Will read the first series later on
      • Well read.  The reader does an excellent job of using different voices for different people
    • Talked to the guys from Full Circle about the article I wrote and they got back to me saying it might be a few issues before we do anything and that I would need to add some graphics or screen shots.  Also found a mistake I had made in the article I sent for review where I mention ssl forwarding instead of ssh -l for local port forwarding. Got that cleaned up and now I am adding images.
      • Also discussed a portion of the article on TLLTS
    • Local Lug
      • Spent a lot of time talking about security and VPNs.
      • The guy I was talking to sells electronic insurance and wants to protect clients and client data.
      • Discussed when using a vpn was a good choice and how it was secure
      • Someone brought in the pinebook pro
        • Really cool device
    • Had to work on my toilet last weekend
      • One of those things where the more you fix the more that breaks
      • The original problem is that the float arm started breaking so if you did not shut it off from the wall it would slowly continue running and draining down the overflow.  
      • We were holding off on fixing it because I am not a plumber
      • But then the shut off valve quit shutting all the way off so I figured to just fix the toilet since I already had the parts and then I work on the shut off valve later
      • Had to shut off the mains from the meter which was a pain.  That replacement was not too difficult other then making a bit of a watery mess but after I got it in place there was still a constant running.  Turns out someone had previously done a glue repair on the overflow and it was not holding up any longer. So had to go to walmart and get more tools and a new overflow valve.
      • In order to replace that part you need to take the tank off.  Problem is that one of the copper bolts was completely rusted stuck.  Well this means that I have to dremel it. I have a dremel but I am all out of cutting bits so I ended up needing to go back to walmart for more bits.  Got it cut out
      • Walmart doesn’t sell the replacement bolts.  So I got everything put back together except for that one bolt and wedged the valve so that the family could use water,  had to wait for home depot to open up so that I could get the bolts.  
      • Did get it all put back together but on the bolt I didn’t replace there is a small leak only when the tank first starts filling. So I will need to replace that and still need to replace the wall valve.
  • Oliver Kelly
    • https://medium.com/@pentacent/nginx-and-lets-encrypt-with-docker-in-less-than-5-minutes-b4b8a60d3a71
    • https://www.humankode.com/ssl/how-to-set-up-free-ssl-certificates-from-lets-encrypt-using-docker-and-nginx
    • http://0lzi.tk/episode-009
    • https://junocomputers.com/

THE NEWS: 

SECURITY UPDATE: 

ANNOUNCEMENTS:

  • Next Show: Nov 17, 2019 – 2PM central time

WRAP-UP:

Before we leave, we want to make sure to acknowledge some of the people who make mintCast possible …

  • Josh Lowe for all his work on the website and the livestream (We’ve had over 60 listeners today on the backup mixer platform and brought on some new listeners who’ve never heard of the podcast)
  • Bytemark Hosting for hosting mintcast.org and our Mumble server
  • Archive.org for hosting our audio files
  • The Linux Mint development team for the fine distro we love to talk about <Thanks, Clem!>

Leave a Reply

Your email address will not be published. Required fields are marked *

Archive.org Hosting

We currently host our podcast at archive.org. If you had considered donating to mintCast, redirect those funds here.

Audacity

As an alternative we also use Audacity as our main audio editing tool so if you would prefer you can donate to them at:

https://www.audacityteam.org/donate/

Next Live Stream:

mintCast on the Web

Episode Archives